- General
-
Вопросы
+6
RMS Express P2P Packet not able to receive message
I'm getting an error message when RMS Express is tring to receive a Peer to Peer Packet message...
*** Link Error - Received data stream not correct format...
I'm able to send messages just fine.
I'm using an AEA PK-232mbx
*** Link Error - Received data stream not correct format...
I'm able to send messages just fine.
I'm using an AEA PK-232mbx
Сервис поддержки клиентов работает на платформе UserEcho
I am also seeing this, using telnet winlink. I'm a little scared of this. Telnet winlink should be the easiest to get right and it's not working reliably. I see this error quite frequently.
*** Requesting connection to Perth
*** Connected to Perth
[WL2K-2.7.0.6-B2FWIHJM$]
;PQ: 76254273
Perth CMS >
[RMS Express-1.1.3.0-B2FHM$]
;PR: 34507059
; WL2K DE W1SOP (FN31FG)
FC EM 9VCPUUFMMY07 147 142 0
FC EM GM55XAE5IPV2 150 144 0
F> 10
FS YY
*** Sending 9VCPUUFMMY07...
*** Sending GM55XAE5IPV2...
*** Unable to save received message to database - possible data or size error - Disconnecting (24.2.200.138)
*** Disconnected
here's the message it's trying to send. Nothing complicated"
Message ID: GM55XAE5IPV2
Date: 2011/10/20 05:17
From:
To: sander_pool@pobox.com
Source: W1SOP-0
Subject: //WL2K to -0
asdasdasd
I don't think it has anything to do with Peer 2 Peer mode.
It worked very well many versions ago., some 1.0. x.y version.
I think the issue is under investigation.
It is in RMS Express, it changes TNC settings to something goofy.
We stopped using RMS EXpress in Washington County, WI ARES because it is not reliable.
I am using PK96/100. Have 2 TNC's, both have done that after latest updates.
Worked flawless before that. Please get on the development teams butt to get this fixed. I get no response on the yahoo group reflector..........
Seems if you don't have a kantronics they don't care about it.
TNC is KPC3+ & both times it occurred, I had to delete the message and re-create it.
I am getting the same error
*** Link Error - Received data stream not correct format...
Im using the internal TNC on a Kenwood TM-D710GA.
This happens at 1200 and 9600 baud, with a very good connect to
a local node.
If I connect with Telnet, I can download the message.
Kenwood has no notes about link errors on their site.
Is this a WinLink problem?
73
Michael Newman
KM6KAQ