1. General
  2. Villur
+8

RMS Express not initiating SCS Modem to P3.

n6kzb 14 ár síðan • updated by Winlink Moderator 13 ár síðan • 6
I have not been able to pin this down as "fact". I have noticed that RMS Express does not always put modem to level 3 after a connect. With a P3 only session, after the initial connect, you will get the disconnect from the remote station, since it only allows P3 sessions. I do not have this issue with Airmail and the same SCS Modem. Modem is USB version with latest firmware.

Answer

Answer
Winlink Moderator 14 ár síðan
Awaiting additional information.
Answer
Winlink Moderator 14 ár síðan
Awaiting additional information.
Lee, K0QED 14 ár síðan
Please substantiate your report by providing logs showing the failed P3 session. See the "Logs" topic in the help system for details on how to do this.
n6kzb 14 ár síðan

I have discussed with Steve Waterman recently and he has advised me that a fix is being sought for sessions not being accepted as P3. No longer a forum issue. Thank you.

n6kzb 13 ár síðan

This issue has been fixed by Vic. Tested over several days and this bug is now gone. Thansk to WL2K for finding the problem as reported. 

n6kzb 13 ár síðan

The logs were of no value in this instance. As they did not show the other sides problem. Vic has corrected it at the server side. Now a done and fixed aspect. RMS Express is reliabnle on P3 connects! 

LA7UM 13 ár síðan

It is kind of the other way around if a PTCII with no more trial P3s is linked to a RMS allowed by sysop running P1,P2, P3, or P2,P3.


RMS Express 1.1.1.3 still do force the PTCII into MYLevel P3 mode, and then TNC stops TX.

Not a problem with Airmail. Session level is automatically detected, allowed and automatic limited to P2 and thus working.

This is part of Pactor protocol, so possible. A possibility of choosing MYLevel 2 would solve the problem. No help in doing this with HYPERTERM first. It is overrun during initialization.

LA7UM 13 ár síðan
Problem solved with 1.1.1.4.
Can now hook for limit to P2.
This solves both Norwegian problem of 1000HZ BW by Law on 30m towards EU.
This also solves all world using old non P3 enabled PTCIIs linking to Servers allowing  P1,2,3.

No more forcing into P3 which stop the TNC from any TX at all.
73 la7um Finn

Customer support service by UserEcho