Further develop RMS Express SW; (to have all Airmail features in it).

This is not too helpful. There is no way ALL features will be included because the software has a more limited purpose. (Airmail supports not only Winlink, but Sailmail and other systems.) However, a specific list of desired features and their descriptions is something we can work with.

The ability is there, but without a template. Look in Airmail's outbox after requesting a catalog item and see how it is done. Thus, it lowers the priority for such a need.

Don't go too far. One of the appeals of RMS Express over Airmail is its simplicity. For example leave out the SMTP server/client features. I'd like to see just what is needed by a single operator at an outlying site to get messages back and forth. Features I would add are support for packet nodes, and peer to peer VHF message passing like Airmail does.

Please make suggestions for specific features. A broad, sweeping request like this one just doesn't work.

I wish that KAM v.6.1 (bugfri pactor1). KAM_E v.6.1 and above, and KAM+ v.6.1 and above is made avaiable in RMS Express for Pactor 1 (As as been done with PK(AEA)232.

Airmail already has an option of Pactor1 with KAMP+

Including in RMS Express the option of HighTones 2210 CF and (the locked) EU tones 1360hz (1350hz may be the case for later AEA versions) for LSB USE. The additional option for choosing even Side band for those old TNCs (like Airmail) might greatly enhance their narrow band use with extremely good old fsk narrowband filters for RX, and will increase their usability, for exemple with the great rigs FT1000 and FT 990. They only TX LSB in data mode. When Other connections has to be done running pure USB for WINMOR or PACTOR combi P123,(4) boxes when they get ready is can be done through other connectors...mic...plug.

BOTTOM LINE: 1:This requests will make it easy for us "Elmers" in the field to get anything working. 2: If Pactor1 is running and a Winmor Server is within reach, then go for WINMOR. But (as still is the case in EU), many more stations are qrv Pactor mode only, THEN the KAM+, even slow, may come in handy..

73 de la7um Finn

yes, auto forwarding on HF. Enable it with the access code used for federal users.

The addition of an Airmail interface to the WINMOR modem is a great idea. Most of the WINLINK users that I know are cruisers running up and down the East Coast and to the Bahamas. I have helped a number of them with the use of HF to access email and I have found that the Airmail interface seems to work as the users expect. Most are not serious hams and only use their license for communications. What that means is that they are not overly technical and don't care to be. So, anything thing that looks, feels, or smells like something they know would make life great. Thanks for taking the input.

73,
Barry
K3NDM

Sorry, Barry, no can do. Airmail is owned and developed by Jim Corenman, KE6RK. You will need to make this suggestion to him. See http://www.siriuscyber.net/ham/.

What I miss in RMS EXpress is the 'red' flag indicating a new and unread message in the INBOX. It's so easy to spot new msgs in Airmail. I hope this can be added.

Hi, thanks for the new RMS Express 1100 including RPR for SCS DSP Tracker. Might it later be a way for a HF RPR enabled PTC2 controller to do HF message transfers using this mode as well as its default Pactor modes? Or am I missing something? Maybe it's already there?
73 de Finn/LA7UM

It would be very nice if RMS Express had the ability to change font type and size.    Thanks.

Don  K7BFL

I have to ask about the possibility of adding the E-MAIL POP Server to RMS express..

In  a EOC environment,  the Airmail E-mail pop server actually allows the capability of Outlook/outlook Express etc as the  e-mail client without have to "copy" or "paste" a message into the AIRMAIL program..Than send out via radio.  We can send out currently everything except WINMOR because we have to use Airmail with Mail Server, than copy and paste a message into RMS express to send out via WINMOR.  Please consider it for the future add on?

73 Dave W2SRP

Munroe Regional Med Cnter, Ocala, Fl

Spec Projects Ham radio Emergency communications vol.

And, also a driver to support the Kantronics KAM (KAM-series modems like KAM-plus and KAM-XL).  Also a driver to support the new SCS Dragon (DR-7800) P4 modem.

Grib File download - Pretty please !!

Hello,
sorry for double posting this, I opened another feedback subject but it appears most RMSExpress comments are here.

In 1.1.4.0  the time stamping on incomming messages still is only 00:00

This is easily seen if forwarding message to someone else.

EU letters now working well in Text body. Should be avoided in Subject line.

Thanks
73 Finn/LA7UM

I see much progress in the development of the program - thank you for you work!

now my wish:

What I would like to see is a simple online statistics to estimate the throughput. 

(download / upload speed in kB/min for example)

I know, I can go into the logfiles and calculate, but for this work we have computers :-)

The progress bar is very nice and I think it already does some calculation in the background, maybe you can show the numbers somewhere in the status line or on the RX screen. 

tnx,

73!

Werner oe9fwv

Time stamping fixed. Many versions before 1.1.9.0

Also the continuation on a broken link. 1.1.8.4. A majour achievement.
Thanks.

Maybe the Driver for Pactor1 for KAM-XL and KAM+
Mostly the same. Just add SHIFT MODEM, and the mark and space commands for KAM XL will get into action in the older KAMs.

73 de LA7UM Finn